If you’ve been looking for a 34-inch monitor mount, you may not have found it to be such a straightforward task.
It’s true that you can find lots of excellent monitor stands these days, but then a lot of them seem suited for mostly smaller monitors.
They’re mostly designed for 13 to 27-inch monitors.
This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
Maybe they can accommodate 30-inch monitors, or perhaps go with 32 inches, but you get to 34-inch monitors and you have a problem.
In fact, you might say that you have several problems.
There are several potential problems with finding a monitor desk mount suitable for a 34-inch monitor.
The main problem is that many monitor desk mount stand models simply can’t handle the weight of a 34-inch monitor.
They’re a bit heavier, so the stand can become unbalanced.
You could use desk mounting options such as bolting or using a C-clamp.
However, you still need to make sure that the stand’s supported monitor weight covers the weight of your monitor.
That’s because you may end up with a “droopy” monitor, which tilts down regardless of how much you want it to directly face your eye level.
Dual Monitor Setup
You also really have a problem when you’re dealing with a dual monitor setup.
A single monitor setup is already a challenge, so dealing with the size and weight of two 34-inch monitors is certainly a more troublesome problem.
The good news is that there are terrific dual monitordesk mount out there, though you may need more time to find a good triple monitor stand.
Factors to Consider
It’s best that you read reviews from customers (our reviews too), and also the spec sheets of the 34-inch monitor mount models you’re considering of buying.
That way, you get a better idea of what you’re actually getting.
When you read these reviews and technical specs, pay attention to the following:
Can It Hold Your 34-Inch Model?
You can’t just go with a monitor desk mount that can support 32-inch models and think that this is close enough.
The tech sheet has to specify that it’s meant for a 34-inch model.
Better yet, find one that can accommodate a wide range of larger sizes.
That way, if you go with a larger monitor in the future then you won’t have to buy a new monitor mount.
You need to check the weight limit of the monitor mount, and make sure that your monitor doesn’t exceed that limit.
Then you should also make sure that the VESA pattern at the back of your monitor matches that of the monitor mount.
To help confirm that your 34-inch monitor mount can actually do its job, check its design and the materials used.
Look for lots of steel and aluminum, which offer the requisite strength to hold your monitor.
See if you have a large and heavy base, if you’re going with a free-standing mount.
Better yet, look for more secure desk mounting options such as a C-clamp or grommet mounting.
That way, the whole thing doesn’t go tumbling down with the slightest bump.
How much are you able to adjust the monitor?
The range of positional adjustments you get must meet your requirements.
You should look over how much adjustment angle you get for the tilt and swivel.
Some systems use a monitor’s gas spring system to make sure that the monitor won’t tilt down accidentally due to the monitor’s weight.
See if you can rotate the monitor, so you can switch to a portrait orientation that works very well with documents.
Check how much leeway you get when it comes to adjusting the height.
Distance to Screen
Your 34-inch monitor mount may also have monitor arms that let you bring the monitor up close or far back to you.
Obviously, if you have 2 monitors then you need a dual arm mount stand.
How are you able to adjust the monitor?
Some models are able to let you make tilt, swivel, and rotate adjustments with just your hands.
You may not even have to stand up from your seat.
Making Height Adjustments
Height adjustment can be a bit more complicated.
Especially with systems that use screws to set the arms or the bracket along the central column of the stand.
You may have to use an allen wrench to set the height.
You need it to loosen the attachment so you can slide the bracket up and down the column to set the height.
Once you’ve set it to the height you want, you can then tighten the joint.
Others have release knobs for this purpose, while other systems have notches along the column where you can set the monitor firmly.
The most common extra feature you’ll find is a system to help with cable management.
Basically, this is a series of clips that secure the monitor AV and power cords along the side of the arms and central column.
This gives the whole thing a neater look, plus it reduces the chances of the wires getting in the way.
Other setups offer front-loading ports as an added convenience.
This means you won’t have to go to the CPU tower to attach things like your USB stick, portable hard disk, headphones, mics, and cameras.
Easy to Assemble?
The best 34-inch monitor mount setup shouldn’t be all that hard to put up.
Securing the mount stand to your desk or wall shouldn’t be all that hard, and the same goes for securing your monitor to the setup.
Make sure that you get all the hardware you need, and if possible, the package comes with the tools you’ll have to use.
However, some of these monitor mounts may require that you have your own screwdriver.
How to Approach Assembly
Read the customer reviews, and take note of how many complaints have been aired about having difficulties putting the whole thing together.
Too many complaints about difficult assembly can be a definite warning sign.
You may want to find YouTube videos showing you exactly how to assemble your mount stand, so you can just do what’s shown on the demo video.
Our TOP 5 34-Inch Monitor Mounts
To get you started on your search for a mount that suits your ultrawide display screen, here are some great options you should look over:
“Unlimited Adjustment for 34-Inch Monitor”
Our Rating: 4.5
Now this is one 34-inch monitor mount useful that really lets you position your monitor however you want.
Basically, you set this up at the back edge of your desk.
But its long arm lets you get the monitor as close to you as you want.
It’s meant to solve your problems and to make life a lot easier for you when you’re working on your desk.
2 Installation Methods
With a large monitor to support, you need a secure base that won’t allow your monitor to tumble down.
This North Bayou mount offers 2 secure installation methods, as you can go with the clamp as one option.
The clamp is good for desks with a thickness within a range of 0.78 to 3.54 inches.
The other option is to go with the grommet mount base, which also requires the same desk thickness as with the clamp.
It’s just that you better have a grommet hole in your table with a diameter within a range of 0.78 to 3.15 inches.
This is for larger monitors, as it’s designed for sizes ranging from 22 to 35 inches.
The weight of the monitor can’t exceed 19.8 pounds, while it can’t go lower than 6.6 pounds.
At the back of the monitor, the VESA pattern has to be 75x75mm or 100x100mm.
When you put in the monitor, you can then adjust the gas spring tension to hold the monitor in place.
Full Range of Motion
The arm here extends 27.5 inches at most, giving you a maximum height for your monitor at 24 inches (measured to the top of the monitor).
This can work for your stand desk, since you can also tilt the monitor up 55 degrees if you’re tall.
You can also set the monitor up a bit high and tilt it down to face you by 8 degrees at the most.
The arm does have a fixed angle on the joint on the desk.
That means you can’t really fold the monitor against the wall (if your desk is set against a wall).
However, you can rotate the arm on that joint 360 degrees.
The arm also has an elbow, so you have lots of positional possibilities.
That elbow can also rotate 360 degrees.
The joint by the monitor gives you a 180-degree swivel angle, plus you’re able to rotate the monitor 360 degrees as well.
This comes with cable management, which is almost a requisite feature these days.
The cables are set along the arm, so they’re not dangling dangerously (and un-aesthetically) from the monitor.
What’s more uncommon is that it also features 2 built-in USB ports at the base of the mount.
You can then recharge your smartphone a lot easier, or connect various accessories like headphones.
“Stable Yet Adjustable Monitor Mount”
Our Rating: 4
This is rated for heavy-duty, given that it can support a monitor weight ranging from 13.2 up to 33 pounds.
That minimum weight is crucial, because this features a gas spring for the height and the minimum weight keeps the monitor where you want it.
If your monitor is too lightweight, though, then the counter force offered by the gas spring will just lift the monitor higher up.
The high maximum weight, however, is a relief for those who have very large and heavy monitors, as some 34-inch monitors can be rather heavy.
Don’t worry about the durability of the mount arm, as it is made with aircraft-grade aluminum.
If your monitor is within the weight range while also measuring between 10 to 34 inches, then you can use this Loctek monitor mount heavy duty.
To be really sure, check that your monitor has a 75x75mm or a 100x100mmVESA pattern at the back.
This comes with a multijointed arm, with adjustments possible at the desk joint, the “elbow” and the monitor joint.
You can raise the monitor up to a height of 21 inches, which can even work if you’re standing.
The monitor also extends from its base by a maximum of 23.5 inches.
This offers a wide range of tilt and swivel adjustments, and it can even tilt up so that it’s almost horizontal.
That lets you stand and look down at your monitor set low on your desk.
Plus, it rotates the monitor to enable you to get a portrait orientation.
You can clamp the base at the edge of the table, provided the desk thickness is between 0.98 to 4.7 inches.
You can also go with grommet mounting, with a surface hole from 0.33 to 2.76 inches wide.
After securing the mount to the desk, you then attach the monitor.
Finally, you need to set the tension of the joint to match the weight of the monitor, using the allen wrench that comes with the purchase.
You can tighten the tension for heavier monitors, but the adjustments will then require more force.
You can make easier adjustments with lighter tension, but your monitor may also end up out of position more easily.
Rest of the Features
This comes with cable management, which allows the cables to move easily even while you move the monitor around.
Also, you have a USB port at the base, along with audio in and out.
You can then put it a mic along with a set of headphones, while you use the USB port to charge your smartphone.
“Adjustable Stand for Bigger Monitors”
Our Rating: 4.5
As the name of the desk mount says, this is for ultra-wide monitors and TVs.
That’s good news if you have a 34-inch monitor, and even more so if you plan on getting a bigger monitor in the future.
You won’t have to buy a new monitor mount, as this can accommodate monitors up to 42 inches in size.
Is Your Monitor Compatible?
If your monitor is also within the 22-pound weight limit, then it may work with this mount.
All you really need to check is if your VESA mounting pattern at the back of the monitor is within 75x75mm to 200x200mm.
But if you have a smaller VESA pattern, this may work too.
The mounting extensions are removable so you can put in the right VESA extensions.
This comes with all the necessary hardware you need to clamp this mount on your desk.
Your desk just has to be less than 4 inches thick.
Grommet mounting is also possible, but it’s optional.
This has a bracket that slides up and down a 17.5-inch central pole.
You just set the bracket along the pole at the height you want.
If the monitor isn’t at the right height for another user, you can just tilt the monitor up and down by 45 degrees.
This can also swivel by 45 degrees to the left and right, so the person beside you can get a better viewing angle.
The monitor can also rotate fully by 360 degrees, giving you a portrait orientation or even an inverted landscape view.
The black finish of the mount looks great with most monitors, and offers a professional yet sleek look for your desk.
With the arm stand off the center of your desk, everything looks neater.
Even the cables are out of sight, with the integrated cable management.
“Solid Wall Mount for Monitors”
Our Rating: 4.5
If your desk is set against the wall, you may be better off just mounting the 34-inch monitor on that wall facing you.
For that, you may want this 34-inch monitor mount, which has a single monitor arm extension that can support monitors in sizes 27 to 45 inches.
That’s very good news if you already have a 34-inch monitor and you’re planning on an even bigger one in the future.
This has a maximum weight limit of 28.6 pounds, but there’s also 6.6-pound limit, to counteract the force set by the gas spring.
Check whether your monitor has a VESA pattern with the range of 75x75mm up to 200x200mm.
If yes, you can use it with no worries.
Monitor Height Adjustment
You can raise the monitor’s height easily enough, simply by raising the monitor to the height you want.
You can do that with your hands, while you’re sitting down.
You can lift the monitor by 9.5 inches relative to the setting on the wall.
You can also extend the arm fully by 14.9 inches, in case you can’t see the monitor clearly when it’s set against the wall.
The monitor can also tilt up by about 45 degrees, or down by maybe 40 degrees.
The swivel is also 90 degrees to the left and right.
You can actually set the arm flat along the wall, while you can then turn the computer screen to face you directly.
The monitor can also rotate 180 degrees, which lets you get a portrait orientation or even an upside-down landscape.
“Durable Highly Adjustable Monitor Mount”
Our Rating: 4.5
This is a premium 34-inch monitor mount that is quite durable.
The highly durable die-cast gas-springs are made of polished aluminum of the highest quality.
As for compatibility, it fits VESA 75 and VESA 100 monitors.
As an added bonus it comes with cable management, helping you keep the cables organized and tidy.
Great Range of Motion
The mount has a great deal of adjustability.
You have a height adjustment range of 7.1 to 24.4 inches.
You also have rotation of 180 degrees, swivel of 270 degrees and tilt of 90 degrees.
Thanks to the gas springs, you can readily make these adjustments smoothly with minimal effort.
You just have to make sure you adjust the tension according to the weight of your monitor (Clockwise for lighter monitors and counter-clockwise for heavier monitors).
Two Installation Methods
First you have the C-Clamp mount that can attach it to the edge of your desk.
Only problem with this is that you can only mount it at the edge.
Secondly, you have grommet mount that you can use if there’s an existing hole on your desk.
Even if you don’t have a hole you can consider cutting one to use this installation method.
34-Inch Monitor Mount: Conclusion
Having a large monitor can be a problem, as you may end up with a cluttered desk that actually leads to worse productivity.
But the right mount certainly helps.
The thing is, finding the right mount for a large monitor such as a 34-inch can be challenging as well.
The good news is that it’s a problem that we’ve solved for you, so check out the best 34-inch monitor mount models on our list!