• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar
  • HOME
  • ABOUT US

Office Sugar

  • NOTEBOOKS
  • STATIONARY
  • PENS & PENCILS
  • MARKERS
  • OFFICE EQUIPMENT
  • OFFICE FURNITURE

Angulizer Ruler – See Our TOP 5 Picks!

angulizer ruler - 2

What the heck is an angulizer ruler?

This is a natural question to ask if you’re one of those people who have no interest in DIY projects, especially in working with wood.

But among woodworkers and other DIY enthusiasts, it’s a wonderful tool that saves a lot of tedious time and effort.

This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.

CLICK To Our FULL Product Reviews

You can find a lot of use for your angulizer ruler if you like to work with tile, wood, brick, and countertop.

The Angulizer Ruler Design

An angulizer ruler is essentially a set of 4 (or even more in some cases) interconnected rulers.

You can slide and then lock these adjustable rulers into various positions and angles.

That is why the tool is also known as a multi-angle measuring ruler tool.

The tool allows you to measure lengths and sides around various angles.

You’re also able to create various layouts as well, for laminating, lumbering, paving stone, bricking, and tiling.

Actually, this is so versatile that some experts have listed up to a thousand different uses for it.

Top Uses

Here are some fields of study and work that can certainly benefit from this type of tool:

Architecture

With this tool, you’re better able to create accurate layouts for bridges and landscapes.

You will be able to get accurate measurements especially for various angles.

You can also configure this tool to act like a T-square.

Surveying and Forestry

This tool can help you when you’re trying to determine the specific grade of some roadway, or measuring the foundation of a building.

The tool can help with determining tree heights and then putting plan to paper.

Geometry Classes

This is an obvious way to use this, as you can then draw various angles and duplicate the work on paper.

Carpentry and Other Household Tasks

This is the main use for DIY enthusiasts, since not all work with wood involves straight lines and right angles.

With this tool, you’re can do various tasks:

  • Repetitive marking for bricks and tiles
  • Mark transference
  • Measuring roof angles
  • Gauging half bricks
  • Corbelling
  • Tiling
  • Angles for paver bricks
  • Dentil courses
  • Marking lumber

Part of the fun is discovering new ways to use this.

This can really make DIY projects a lot more fun, plus a lot easier besides.

Factors to Consider

It’s not true that one angulizer ruler is much like another.

Some are better than others, which starts with the price.

Of course, you should also consider other factors aside from affordability:

Design

It’s true that most angulizer ruler systems come with 4 ruler arms along with knobs.

But you may find other systems that offer 6 ruler arms or more.

While having more arms extend the versatility, you have to shoulder the additional cost.

Having more arms may also make the tool more complicated to use.

Ease of Use

Since an angulizer ruler isn’t like an ordinary ruler, a newbie will have to learn how to use the tool properly.

That may take a while, depending on the model.

However, the tool should come with a manual that should provide detailed instructions on proper assembly and use.

Durability

A design that involves interconnected rulers may not be all that stable, and it can be very easy to accidentally break one of the components.

It’s best if the manufacturer uses tough materials, such as metals instead of plastic for the ruler.

Even if it’s plastic, at least it should be extremely durable plastic.

The bendable plastic usually found in children’s school rulers just won’t do.

Dimensions

This mainly pertains to the length of the arms.

After all, this length dictates the ability of the ruler to measure various lengths.

So, the ruler arms can’t be too short.

At the same time, if the ruler arms are too long then the tool may be more unwieldy and also more susceptible to breaking.

Some people also prefer thinner rulers, especially if they’re made of metal, as they’re easier to use and more portable too.

It also helps with portability if the purchase comes with a specially designed bag to fit the angulizer ruler inside. 

Measurement Readability

Like regular rulers, the sides of the ruler arms should offer measurements in both inches and centimeters.

It’s best if the measurement marks are easy to read, and most people prefer laser-etched markings.

That way, the marks won’t fade over time, unlike printed marks.

Free Tools

You may find that a gauge duplicator comes with your angulizer ruler.

That really extends the functionality of your purchase, and can really expedite the work.

Our TOP 5 Angulizer Rulers

Here’s a list of the 5 best angulizer ruler options you should consider first, along with a closer look at what makes each one so special.

1. ANKACE Multi Angle Measuring Ruler

“Designed for Long-Term Use”

Our Rating: 4.5

Buy From Amazon

This Template Tool from Ankace gives you the standard 4 ruler arms with 4 knobs to connect the arms together.

This is made for both professional workers as well as DIY enthusiasts.

For 2 arms, the length measurement reaches up to 10 inches, with centimeter markings on the other side.

The other 2 arms are shorter, with the 0 mark in the middle and then measuring up to 2.5 inches to each side.

Tough Materials

You won’t have to worry about bending or breaking the ruler arms here.

They’re all made with premium aluminum alloy.

This is resistant to bending and rusting, and it’s even hard to scratch.

The knobs have also been upgraded, so they’re all made with metal as well.

The all-metal construction holds the angle better, and provides a more accurate transfer.

Readable Markings

The marks are white on a black background, so they’re very easy to use even at a glance.

Also, the scale numbers and marks have been etched by laser, instead of just merely printed on the ruler arms.

These marks can’t be wiped out even over time.

Of course, with these standard inch and centimeter markings, you can’t really consider this a precision tool.

Easy to Wield

The knobs lock the angles into place, and it’s easy to slide to tool all around your angled projects.

The ruler arms are also much thinner compared to other angulizer rulers, making it easy to use.

The thinness also occupies less space in your toolbox.

You even get a nice velvet pouch for the angulizer ruler, for better protection and portability.

Your purchase, in fact, also gives you a hard paperboard box for storage along with a nice manual to consult.

What We Like
  • All-metal build
  • Very durable
  • Holds the angle better
  • Comes with box and velvet pouch
  • Laser-etched markings
  • Nicely priced
  • Comes with a manual
Not So Good
  • Not really for extremely precise measurements
  • A bit awkward to handle
  • Not highly sturdy

2. Amenitee Angle Layout Measuring Ruler

“Built to Last”

Our Rating: 4.5

Buy From Amazon

This is the most expensive angulizer ruler on this list, though the price isn’t actually all that high.

But if you’re looking to something to help you create professional layouts, this is what you need.

You get the standard 4 ruler arms with the 4 knobs here.

The measurements are also the same, with the 2 longer arms measuring up to 10 inches on one side and 25 centimeters on the other side.

The shorter ruler arms also have the same zero mark in the middle, with marks up to 2.5 inches on each side.

4-Part Package

Your package also includes the knobs and other hardware you’ll need to assemble your angulizer ruler.

Aside from this tool, you also get a hard paperboard box for storage, along with a storage bag as well.

Finally, you also have a user’s manual you can check out for assembly and usage instructions.

This manual is quite nice, and it can even give you new ideas on how to use this angulizer ruler.

Aluminum Alloy

Instead of plastic, the ruler arms here are also made of aluminum alloy.

That means they hardly bend at all, and they’re much more difficult to break.

But it’s not all that thick, either.

In fact, it’s actually thinner than other rulers of this type, so it doesn’t take up as much space.

This can last a long while, even with the expected wear and tear.

Soft Gasket

This doesn’t come with an all-metal build, but that’s not necessarily a bad thing.

It uses a soft gasket made of plastic, located under each metal knob.

The gasket makes it easier for you to twist the knob when you’re loosening the knobs and readjusting the angles of the ruler arms.

Also, the gasket offers additional protection for the scale from normal wear and tear.

What We Like
  • Quite easy to turn the knob and adjust the angles
  • Durable
  • Compact and lightweight
  • Comes with a storage bag and box
Not So Good
  • Printed measurement marks may fade over time
  • Comparatively expensive
  • Not easy to use at first

3. General Tools 836 ANGLE-IZER Template Tool

“Affordable and Handy Tool”

Our Rating: 4

Buy From Amazon

At first glance, this looks very different from the first 2 angulizer rulers on this list.

That’s because the ruler arms are yellow, with black markings.

In fact, it makes you think that it’s a system of tape measures rather than rulers.

Measurement Marks

Again, you also have the usual 2 longer and 2 shorter ruler arms here.

The usual measurement markings are in place, with the longer arms reaching up to 10 inches on one side and 25 cm on the other side.

For the shorter ruler arms, you again have the zero mark in the middle, with the marks reaching up to 2.5 inches on either side.

The black on yellow color combination is undoubtedly easy to read.

In addition, the markings have been engraved by laser, so they will not fade out over time.

Materials

The ruler arms here are made with nylon, reinforced with fiberglass for greater strength.

That should be strong enough for long-term use, and the ruler arms won’t break or chip if you drop the tool.

The use of the fiberglass-reinforced nylon cuts down on the weight, making this lightweight and more portable.

It’s also probably the main reason why it’s the most affordable model on this list.

It costs only half as much as the most expensive tools here.

Easy Use

This uses a special tightening mechanism, which you’ll appreciate when you loosen the knobs to adjust the angles of the ruler arms.

This time, loosening and tightening the knobs is much easier.

In fact, with practice you should even be able to do it with one hand.

That’s very useful for DIY jobs, when your other hand is likely to be holding another tool for your tasks.

What We Like
  • Lightweight
  • Easy to read
  • Very affordable
  • Easy to loosen and tighten with a single hand
Not So Good
  • Made with nylon instead of metal
  • Quite flimsy
  • Cheap construction

4. Amenitee Six-Sided Aluminum Alloy Angle Measuring Tool

“Versatile Use After Practice”

Our Rating: 4.5

Buy From Amazon

This is also among the most expensive ones on this list.

But that’s understandable, since the design includes 6 ruler arms instead of just 4.

That makes it a lot more versatile, with some people contending that you can find more than a thousand uses for this tool.

6-Sided

All the ruler arms here come with the same length and measurement markings.

They all measure 6.77 inches long from end to end.

The markings have the zero at the center, ending up to 2.5 inches on other side of the center zero.

On the other side of each ruler arm, you have the measurement markings in centimeters, ending up to 6 centimeters on each side of the zero.

Package Contents

Your purchase, aside from the 6 ruler arms, also includes the 6 knobs and the necessary hardware to attach them.

Finally, you have the locator you can attach at the end of a ruler arm.

Design Features

This comes with a recessed slide design, with a concave back slide.

The slider is aligned with the back.

The background is black, with white text markings to make the measurements easy to read.

You also have both inch and centimeter marks on either side of the ruler arms.

Usage

All you really need to do is to slide the rulers in the shape you need them in, before you tighten the screws.

The locator lets you fit the hole you want to slot.

You can then use this as your stencil so you can cut your workpiece.

You have 3 locator types here, so you should easily find the position you need to slot.

No Manual

This doesn’t come with a manual, however.

The good news is that if you have an internet connection, you can always go to YouTube.

There you will find videos that show you how to sue this specific model.

Easier Twisting

You also have a soft gasket here under every knob.

That way, you’ll find it easier to twist the knob loose, and also easier to tighten the knob.

The soft gasket also minimizes the wear and tear on the scale.

Durable

The ruler arms are all made with aluminum, which makes the ruler arms both strong and lightweight.

You won’t find it easy to break the ruler arms, but the whole thing weighs less than 10 ounces.

What We Like
  • Made with aluminum
  • Comes with a soft gasket
  • 6 ruler arms
  • 3 locator types
Not So Good
  • A bit more expensive
  • No manual included in the purchase
  • Rulers bend easily

5. Alpha Impact Bundle Kit

“Useful Ruler and Gauge Duplicator”

Our Rating: 4.5

Buy From Amazon

This time we’re back with the standard design with 4 ruler arms.

But that’s not all you get.

It also comes with a nifty gauge duplicator which extends the usefulness of the tool.

Working in tandem, you’re better able to measure irregularly shaped objects, and the measurements can help you duplicate items more accurately.

Dimensions of Rulers

The 4 ruler arms come with a black background, on which you find the white measurement markings.

The standard measurements are all here.

The 2 longer ruler arms measure up to 10 inches on one side and 25 centimeters on the other side.

The 2 shorter arms have the zero mark in the middle, then measuring 2.5 inches to the left and right.

That’s 6 centimeters on the other side of the arms.

As for the gauge duplicator, it’s also 10 inches (25 centimeters) long.

Tough Aluminum

You’ll find the tough aluminum here for the ruler arms, which won’t rust at all.

These things won’t break or chip easily, which gives you a nice tool lifespan to look forward to.

The gauge indicator is made with durable ABS plastic, to cut down on the weight while it’s still strong.

Versatility

The ruler arms on this thing are obviously quite useful for a lot of tasks.

But the gauge duplicator really enhances the range of tasks you can complete.

With the gauge duplicator, you’re really able to measure irregular shapes with unerring accuracy.

All in all, these 2 tools are invaluable for duplicating and measuring materials and objects for your DIY projects.

No Lock for the Gauge

This is perhaps the main issue here.

Obviously, the angulizer ruler locks in place to make sure you maintain the angle for the ruler arms.

But there’s no lock for the gauge indicator.

So, you have to be very careful once you’ve obtained the measurements using the tool.

If you bump it, you’ll have to re-measure.

What We Like
  • Includes a lightweight gauge duplicator
  • Ruler arms made from aluminum
  • Extremely useful for many DIY tasks
  • Long-lasting
  • Reasonably priced
Not So Good
  • Printed measurements
  • No lock for the gauge indicator
  • No user manual

Angulizer Ruler: Conclusion

It really is best if you can find a manual that comes with the purchase, to help you get started.

It’s a safe bet that your preconceived notions regarding how to use this tool won’t be completely accurate.

That is, this is much more versatile than you probably expected.

A manual can give you a lot of ideas not just on how to use this properly, but on how you can use this in various ways.

After reading the manual, you then should check out YouTube and watch videos to see this tool in action.

Once you realize how useful an angulizer ruler can truly be, you’ll kick yourself because you haven’t bought one yet!

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

What’s HOT! Our TOP 3 Posts!

  • Best Luxury Pens In The World - 5 TOP Options!
    Best Luxury Pens In The World - 5 TOP Options!
  • Home Office Desk For Dual Monitors - Our TOP 5!
    Home Office Desk For Dual Monitors - Our TOP 5!
  • Different Types Of Calculators - Our TOP 5!
    Different Types Of Calculators - Our TOP 5!

RECENT POSTS

desk chair for large person - 2

Desk Chair For Large Person – Our TOP 5!

chair mats for l shaped desks - 2

Chair Mats For L Shaped Desks – 5 GREAT Options!

portable lap top speakers - 2

Portable Lap Top Speakers – We Pick Our TOP 5!

complex liquid motion toys - 2

Complex Liquid Motion Toys – 5 Picks For Your Desk!

door stop on door or wall - 2

Door Stop On Door Or Wall – 5 GREAT Office Options!

different types of door stops - 2

Different Types Of Door Stops – 5 TOP Office Options!

commercial hinge pin door stop - 2

Commercial Hinge Pin Door Stop – Our TOP 5!

angulizer ruler - 2

Angulizer Ruler – See Our TOP 5 Picks!

different kinds of rulers - 2

Different Kinds of Rulers – 5 GREAT Options!

led lights for business windows - 2

Led Lights For Business Windows – Our TOP 5!

post it notes for books - 2

Post It Notes For Books – 5 GREAT Options!

led lights in cold weather - 2

Led Lights In Cold Weather – We Pick Our TOP 5!

12 volt led lights off grid - 2

12 Volt Led Lights Off Grid – 5 TOP Options!

1.5 x2 post it notes - 2

1.5 X2 Post It Notes – Our TOP 5 Picks!

gel pen sets for coloring - 2

Gel Pen Sets For Coloring – 5 GREAT Options!

best fountain pen ink for cheap paper - 2

Best Fountain Pen Ink For Cheap Paper – Our TOP 5!

best fountain pens under 200 - 2

Best Fountain Pens Under 200 – Our TOP 5!

rollerball vs fountain pen - 2

Rollerball vs Fountain Pen – 5 TOP Options!

20 x 26 poster frame - 2

20 X 26 Poster Frame – See Our TOP 5 Picks!

18x24 frame matted to 12x18 - 2

18X24 Frame Matted To 12X18 – 5 GREAT Options!

green air oil diffusers - 2

Green Air Oil Diffusers – Our 5 Favourite Diffusers!

best smelling diffuser oils - 2

Best Smelling Diffuser Oils – Our TOP 5!

essential oil burner vs diffuser - 2

Essential Oil Burner vs Diffuser – 5 GREAT Options!

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy

Copyright © 2021 Office Sugar • Terms of Use, Privacy Policy and Cookie Policy

Office Sugar is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates. As an Amazon Associate we earn from qualifying purchases.