It’s a good idea to stick with Chief monitor arms for your PC monitors, especially if you’re looking for something reliable.
The Chief brand has been around the audio-visual industry for more than 35 years now, with a great reputation for innovation along with easy installation and maintenance.
The main issue here isn’t about the brand, but about the model you pick.
This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
The Chief brand offers a wide range of monitor mount models, even including outdoor mounts for open-air stadiums.
Even if you’re only looking for desk mounts, you still have lots of choices to pick from.
Factors to Consider
First of all, you should consider your particular circumstances and take note of your specific needs.
Read the spec sheets and reviews written by customers, and take note of the following considerations:
For How Many Monitors?
Exactly how many monitors are you planning to use?
The Chief monitor arms lineup can work with multiple monitors, from one to even more than 3.
Of course, 3 is the optimal setup, as you can set the other screens to the left and right.
With more monitors, you get diminishing returns for your money in terms of productivity increases.
One good thing with the Chief brand is that they offer upgradable mounts that you can use even when you add an extra monitor.
They offer a dual arm mount for 2 monitors, and you can just add an extra arm when you want to use another monitor.
You have basically 2 options, if you’re working in an office -you can install the mount on the wall, or you can set it on the desk.
For the desk, you can go with the basic clamp or with grommet mounting.
At this point you ought to make sure that the mount is easy to set up and install.
The good news is that most Chief monitor arms are easy enough to put up and come with all the hardware you need, plus clear instructions.
The only likely problem is when you have a large monitor or TV to deal with.
You may need a second person to help you lift the TV to the bracket, but that’s not really a problem with the mount.
Flush or with an Arm
If you’re using the monitor mainly as a viewing screen for yourself, then you may want to set it flush against a wall.
That gets it out of the way, and no one has to bump into it.
You won’t have anyone changing its position either, which can be annoying.
But you can have more position options with Chief monitor arms.
These articulating arms can let you set the monitor close to the wall.
Or you can extend the arm so the monitor is nearer to your position.
This is basically dependent on 3 factors.
First of all, there’s the VESA mounting pattern to deal with – your monitor ought to have the right VESA pattern that matches with your bracket.
Then you have a maximum weight limit to take into account, though this isn’t normally a problem.
The Chief weight limits for their mounts are often much higher than what monitors normally weigh.
Finally, you need to take the size of the monitor into account if you have a multiple-monitor setup.
Some mounts can set 3 monitors horizontally, but they can’t be too big or else they’ll just bump and overlap one another.
Some of the Chief monitor arms don’t allow for much height adjustment once you’ve set it to the wall.
So you better make sure you set it to the height level you want, as afterwards you can maybe raise it by an inch.
But others come with arms and a column, so you can set the arms along the length of the column to set its height.
Check for the tilt angles, which in most cases aren’t much.
Some of these monitors can only tilt up and down by15 degrees.
A few don’t even tilt up.
Again, that just emphasizes setting the monitor at the right height before you finish the installation and setup.
Swivel and Rotation
At least many of these Chief monitor arms offer full swivel angles, so you can show the screen to the person beside you.
Other Chief monitor arms also offer full rotation, so you can set the monitors to landscape or portrait mode.
The portrait mode is great if you’re editing photos set in portrait mode.
Also, this is the orientation you want when you’re dealing with documents.
You’re able to see more of the document without having to scroll down.
That should save you time and effort, and boost your productivity.
You often have 2 cables coming from the monitor, and these can be annoying.
You may end up tripping on the cables, or have them bunch up and entangled.
That can be a problem when you’re moving or positioning the monitor.
Also, it looks disorganized and distracting.
But with cable management, the wires are set along the arms and poles, so that everything looks neat.
You won’t have the cables getting entangled either.
How long will it take before the arm becomes weak and is unable to hold the monitor in place?
With other mounts, that’s a real problem with monitors drooping and tilting downwards after a while.
However, the Chief monitor arms are known to set the monitor in place even after years.
Our TOP 5 Chief Monitor Arms
To help you get started on the right choice, here are some monitor mounts you should look at
“Solidly Built Mount”
Our Rating: 4.5
This wall mounting option is one of the many single monitor arms from the Chief brand.
It is meant for TVs measuring 32 to 65 inches, but it works for monitors too.
How do you know if it works for your monitor?
You need to check the VESA mounting pattern at the back of your monitor.
It should be within the VESA range of 100x100mm to 600x400mm.
The weight capacity of this mount single option is 75 pounds, so you shouldn’t worry that a compatible monitor will exceed that weight limit.
Wall Mount Installation
This is a lightweight option, and even a single person can do the installation on your wall.
All you need to do is to mount the top rail and then you can slide on the assembly.
This is compatible with 16-inch wall studs.
Once you have the monitor installed, you can set the monitor almost flush against the wall.
It can be only 1.8 inches from the wall if you want, but you can extend the arm up to 18 inches from the wall.
Includes Cable Management
This comes with a wide-open wall plate plus enclosed cable covers so you can route the signal and power cables neatly.
You don’t even need tools to set your cables.
It’s best if you’re sure right from the start where you want to set the monitor before you start the installation.
This is especially true for the height, because once you’ve installed the monitor, you only have an inch of height adjustment available.
You do have 16 inches of adjustment for the lateral shift.
Also, you have 15 degrees of tilt so you can find the best viewing angle for your position.
Once you’ve extended the arm, you can have as much as 90 degrees of swivel angle to the left or right.
There’s no rotate, though, so you should be content with the landscape orientation.
“Highly Functional Pivoting Monitor Arm”
Our Rating: 4.5
If your TV (or monitor) is somewhat smaller, then you should go with this TS218SU option instead of the TS318TU.
This is meant for screens measuring 26 to 47 inches, as long as it doesn’t exceed the 75-pound weight limit.
This will also work with your monitor, provided the VESA pattern matches.
If the VESA at the back of your monitor is within the range of 100x100mm to 400x400mm, you’re good to go.
Again, you must be very sure you’re setting the monitor at the right height when you mount it on the wall.
Once the monitor is set, you only have an inch of height adjustment to work with.
At least you can set the monitor to either landscape or portrait, and then you can do some post-installation adjustments to make sure the screen is level.
You should make sure the height matches your eye level, and don’t set it lower.
There’s no tilting up, but you can tilt it down up to 12 degrees if it’s somewhat higher than eye level.
The arm lets you set the TV only 1.5 inches from the wall, and you can swing the arm left or right to do that.
You can also extend the arm fully so that the monitor is 18 inches from the wall.
This full extension lets you swivel the monitor fully up to 180 degrees.
“For a Full-Swiveling Large Monitor”
Our Rating: 5
This is the TS318SU, which is also different from the TS318TU that appeared first on this list.
There are several differences, if you look closely (which we did, by the way).
The SU model is lighter by several pounds.
Also, it’s compatible with the single stud wall stud instead of the 16-inch.
This is also UL-listed like the TU, but it doesn’t have the OSHPD approval that the TU has.
In all the other key aspects, it’s virtually the same.
This will work with your monitor provided the VESA mounting pattern is within the 100 x 100mm to 600 x 400mm range.
It should be less than 75 pounds in weight, but that shouldn’t be a problem.
Positioning the Monitor
You can set the monitor only 1.3 inches to the wall, to get it out of the way.
But you can also extend the articulating arm up to 18 inches, which lets you to fully swivel the monitor by 90 degrees left or right.
When you set this arm to the wall, you ought to be sure about its height as well.
Once you’re set, you can level it but you can only adjust the height by another inch.
If you’ve set it up a bit higher, you can still tilt the monitor down by 15 degrees at the most.
It won’t tilt up, though, so don’t set it lower than eye level.
“Sturdy Dual Monitor Mount”
Our Rating: 5
What if you want to set your monitor on your desk?
If that’s the case, then you can go with several Chief desk mounts, particularly the Chief Kontour series.
You can go with this KontourK2C articulating column mount, especially if you have a dual monitor setup.
This setup features sleek aluminum arms in semi-gloss silver and black finishes, like you’d expect from a nice EVO monitor arm.
It looks nice, and it’s even recyclable like several Flo monitor arm models.
But you probably can use this for a long while before you need to recycle it.
You can clamp this to the edge of your desk, or it can work as a monitor grommet mount.
Just make sure the desk is half an inch to 2.5 inches thick.
This works for a dual monitor setup, but the enhanced column interface is actually upgradeable.
If you want to add a 3rd monitor, you can still go with this mount.
This comes with a cable management system, and it also features tool storage as well.
This is geared towards small to medium-sized monitors, measuring 10 to 30 inches.
The VESA pattern has to be either 75 x 75mm or 100 x 100mm, and the weight can’t go over 25 pounds.
Mounted from a Pole
The design of this mount has a pole from which the 2 Chief monitor arms branch out.
You can set the arms farther away from you, or you can set them out fully so they’re 17.63 inches away from the central pole.
You can also adjust each branch up and down the pole to set each one at the height you want.
Range of Adjustments
You have 7 inches of height leeway here, and your monitors don’t have to be at the same height.
You can also tilt the monitors up and down by 15 degrees.
The monitors can swivel left and right, and rotate fully so you can get your monitors to portrait and landscape modes.
If you want, one can be in portrait mode while the other is in landscape.
“For 3 Small Monitors”
Our Rating: 5
This works for a 3-monitor setup, though you only have 1 arm instead of 3 Chief monitor arms.
That’s because this has a 3-monitor bracket that sets your monitors into a single line.
They’re all at the same height as well, and they move together when you position them.
The brackets here don’t accommodate very large monitors.
Normally, you’d use monitors within a 10 to 18-inch size range.
Some marketing materials may say that this can accommodate 30-inch monitors, but that’s only true if you have them all in portrait mode.
Your monitors can’t go over 10 pounds in weight, either.
You also can only match the monitor to the arm if the VESA pattern is either 75x75mm or 100x100mm.
However, this is also compatible with OFB Furniture Brackets.
Adjustments You Can Make
Your monitors can be adjusted after installation, but you need to adjust the tension first.
You can set the tension firmly, so that the monitors stay in place even when you’re using touchscreen interfaces.
However, you can also move the arm about so the monitors can be near or farther from you.
It can be set almost 8 inches from the pole, but it can extend more than 16 inches.
You can rotate the monitor to whatever orientation you want (portrait or landscape), and then tilt it up or down by 15 degrees each way.
Chief Monitor Arms: Conclusion
The truth is, you have a lot of options when you go with Chief monitor arms.
We’ve listed a Chiefs Kontour here, but you can go with the KontourK4 instead.
Some like the K2W wall mount swing arm while others go for the KontourKLW dynamic option.
The Different Features
Some models go with the adjustable standing mounts that offer extreme tilt angles.
That way you can even look down on the monitor on your desk while you’re standing.
If you want more cost-effective Chief monitor arms, then you just need the basic column mounts.
It can either be a dynamic desk clamp mount or grommet mounted.
With such a basic setup, you can just position the monitors as you want and get on with your work.
That’s the beauty of having Chief monitor arms—you can set them and forget them, and just work more effectively.