When you’re running a popular shop or a busy office, it’s likely that eventually you’ll see the utter usefulness of a commercial hinge pin door stop.
Most of these door stops and holders aren’t all that big, with most only several inches long.
Yet they offer a wide range of benefits, especially for daily tasks.
This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
Installing a commercial hinge pin door stop may seem like a small thing, yet your day goes by a lot more easily as a result.
Benefits for the Workplace
Commercial hinge pin door stop prevents damage to your office or shop wall when the door knob slams into it.
You have enough problems without having to divert your cash resources to a problem you could have prevented with a door stop.
Also, lots of office workers and shoppers find the noise of slammed doors unpleasant.
Installing a commercial hinge pin door stop leads to a more conducive atmosphere.
It makes things a lot more professional in an office.
In a shop, your shoppers feel much better when the door doesn’t slam into the wall every few minutes.
Of course, you can use this at home.
Obviously, people at home also don’t like having their walls ruined because kids keep slamming the doors into the walls.
Kids can be rambunctious that way, when they’re full of sugar.
Then they become hormonal teenagers and slammed doors can be a rather regular occurrence.
With the right door stopper, at least you can protect your walls.
Keep Noise Down
In addition, these things can keep the noise down a lot.
There’s nothing that can ruin a nice nap or a good night’s sleep than a slammed door somewhere in the house.
This also offers some people a measure of privacy, when they don’t want other people in the house to know of their comings and goings.
That can be a problem when your door slams even when you don’t want it to.
There are 2 basic designs you can use, though both has a rubber-tipped bumper you can adjust to set the angle of the door opening.
It’s the look of the swing arm which may differ depending on the model.
Some stoppers have a half-moon design, which is standard.
But others have a design that resembles a water faucet.
You may even find door stoppers that look like a huge pin or nail, with almost the same length as a standard ruler.
If you check out the various hinge pin door stop models, you may find that virtually all of them are made of some kind of metal alloy.
The metals may vary, and your options include:
- Bright brass
- Cast metal
- High-quality metal
- Oil-rubbed bronze
- Silver plated
- Solid forged brass
- Stainless steel
- Traditional solid steel
Metals are crucial because you need something strong to deal with the forces involved.
For heavier doors, you may even need 2 of these doorstops for a single door.
You can choose a metal alloy or a particular finish to match the door hardware, or to match the hardware inside a particular room.
How Durable are These Door Stops?
Since these things are made of tough metal, they usually last a very long time.
But they can bend if you keep on trying to smash a very heavy door to the wall.
You have to cooperate as well, and try not to put too much pressure on these things.
However, the rubber door stops take the brunt of the impact force.
They may not last all that long, and in a year’s time you may find that the rubber tip may have worn down.
But you can usually buy replacement rubber tips, usually from the same brand that made the hinge pin door stop.
Usually, if you have some sort of DIY knowledge, installing the hinge pin door stop shouldn’t be a problem.
It’s basically a 3-step procedure.
1. Take out the hinge pin.
2. Insert the door stop.
3. Put back the hinge pin.
To take out the hinge pin, you may need to pry it off using a hammer and a screwdriver.
The hole of the hinge pin door stop is usually matched with the diameter of the hinge pin.
Your best bet is to buy a hinge pin door stop that comes with an instruction manual.
However, you can always check out YouTube, where you’ll find plenty of helpful folks demonstrating how you can install your particular hinge pin door stop.
Our TOP 5 Commercial Hinge Pin Door Stops
Here are the 5 top choices you should check out first:
“Classy Aluminum Door Stop”
Our Rating: 4.5
This comes in a pack of 5 door stops, since it’s likely that you don’t just want to use one for a single door.
This is especially true in an office with lots of rooms and doors to worry about.
The main function of this particular commercial hinge pin door stop is to keep a door from slamming into your wall.
That way, you don’t end up with holes on your door caused by a slammed door knob.
Design and Measurements
This is quite compact, measuring 63.26mm long (that’s about 2.5 inches) and 33.7mm wide.
The stopper with the rounded rubber tip is 35mm long, though its practical length is adjustable.
The hinge pin hole has an 8mm diameter, with a size of 13.3mm overall.
Made of Aluminum
This features an aluminum body, and the metal offers several advantages.
It’s a durable metal that’s resistant to corrosion.
In addition, aluminum demonstrates much greater impact strength, which is crucial for a commercial hinge pin door stop.
It’s both strong and lightweight.
It’s great to have color options for this, even if we just went with the basic white color.
You may want to get something that matches the doorknob and the hinges on the doors.
You have classy options here, including antique nickel, black, brass, brushed antique copper, brushed chrome, brushed nickel, and oil-rubbed bronze.
Using the Rok Door Stop
This is easy enough to install, as you basically just need to slip it onto the pin in your door hinge.
You can do this for the top hinge, especially if you have small children who are too fascinated with door stops and want to play with them.
But for the workplace, you may want to use 2 of these doorstops especially for heavier doors.
You can then adjust the hinge pin stop to set the angle of the door you wish to keep open.
You can set this to keep the door open a little more than 90 degrees.
That way the door way is fully cleared when you bring in materials or when people keep entering or leaving a room.
“Basic Door Stopper that Works”
Our Rating: 4.5
The satin nickel finish here is part of the Better Home product color range, even though it looks classy all by itself.
It’s just that if you get this, then your door stopper can look the same with your other Better Home products.
Examples include your door hardware, cabinet locks, bath accessories (such as grab bars), and home hardware.
This is a standard door stopper meant for preventing damage to your walls when the door knob keeps slamming into it.
This works very well for its purpose, especially considering the low price.
You can then set the length of the adjusting screw to determine the angle of the opening for the door.
That way, it won’t have to open fully and bang on your wall.
For heavier doors, you may want to consider installing 2 door stoppers for a single door.
Easy to Install
You don’t have to drill into the wooden door to get this door stopper in place.
All you need to do is to slide them over the hinge pins, though that’s not always easy.
If the hinge pin is tight, you can bang it out using a hammer and a screwdriver.
Will It Damage Doors?
Normally, it won’t.
However, it can damage the door if someone tries to slam the door really hard against one of these door stoppers.
The door stopper seems durable enough, on the whole.
But the rubber stopper tends to show significant wear after an extended period of time.
The good news is that you won’t have to replace the whole thing when this happens.
You can buy the rubber stopper separately for a reasonable price, and the door stopper will continue to do its job.
“Faucet Shaped Door Stop”
Our Rating: 4.5
Unlike the first 2 door stoppers on this list, this particular commercial hinge pin door stop comes in a decidedly faucet-like design.
This is made for narrow trim installation, and it’s your ideal alternative when a standard door stop isn’t a good idea.
Usually, this is best for hinged doors that aren’t used all that often.
We picked the one made from aluminum, which is considered the “original color”.
It looks nice enough, especially for a commercial setting.
With aluminum, you get the strength you need without the added weight.
The tips are also made of rubber, but you can get replacement tips in white or black once the original tips wear down.
The aluminum can last a long while, since it’s tough and corrosion-resistant.
However, you can opt for the solid bronze version of this commercial hinge pin door stop.
Door Opening Adjustments
Like the other door stops, this comes with an adjustable stopper that can let you limit the angle by which a door can open.
Here, you can set it to open just 85 degrees or up to 125 degrees.
That way, you can keep the door from banging into a wall.
Some people hate it when their door bangs into the same wall where they’ve hung their pictures or their TV.
In fact, some people use this when they place things behind the door and they’re worried about damaging the things when people open the door too quickly.
The screw stopper goes against the door, while the non-screw stopper part goes against the trim.
The removable bushings here accommodate hinge pin diameters from ¼ of an inch to 5/16 of an inch.
Use a screwdriver to lift up the pin on one of the door hinges.
Place the door stopper on top, and then put the pin back on.
That entire process can take you less than a minute (and maybe even just 15 seconds).
You can then adjust the screw until your door stops where it should, while you’re still able to get through the door.
“Zinc Alloy Door Stop”
Our Rating: 4
Like any other commercial hinge pin door stop, the main function here is to protect your doors and walls from slamming against each other.
That way, you don’t get damaged doors, broken door knobs, and annoying slams that can disturb your shop or office.
Zinc Alloy Material
This hinge pin door stop is made with zinc alloy.
It looks great with the satin nickel finish, especially if its look matches the other door hardware like the door knob.
The satin nickel looks very light in its hue, which is great for doors with lighter colors.
However, you can go with a much darker option such as the oil-rubbed bronze.
There’s also the polished brass option, which looks a lot like gold.
Regardless of the finish you pick, this is designed for years of use.
Maybe you may end up with a damaged rubber stop over time, but this is a replaceable component.
Again, this is easy to install.
You can always find a YouTube video to watch how it’s done, though it’s basically a 3-step process.
Pop the pin from the door hinge, set this on, and then put the pin back in.
This works with hinge pin diameters ranging from ¼ of an inch to 5/16 of an inch.
Door Opening Range
You can adjust the screw stopper length to determine how wide the door can open.
This can set the limit from just 85 degrees up to 125 degrees.
“Invisible Pin Door Stop”
Our Rating: 4
Admittedly, this comes in a rather unusual design as it looks like a giant pin or nail.
It measures 10 inches long, and when extended the diameter is 4 inches.
The diameter of the stem is about .23 inches, which means it suits a 4-inch door hinge.
How It Works
This is how you use this:
First, you take the hinge pin out, maybe using a hammer and a screwdriver.
You then insert the length of the door stop into the space left by the hinge pin.
The next step is to set the degree of the 2 ‘lobes’ on the top end, which then controls the degree of the door opening.
The good news is that the purchase comes with an installation pamphlet, so you don’t need to watch YouTube videos to see how it’s done.
Why No Rubber?
It’s an all-metal construct, but that’s because you don’t need the rubber tip.
The design intends the hinge pin door stopper metal to get into contact with the backside of the leaves of your door hinge.
This forces the door to dead-stop.
This allows for a wide range of door opening angles, up to 170 degrees.
With this, you have a commercial hinge pin door stop that’s practically invisible.
Visitors to your shop or office may admire a nice door, without being distracted by a door stopper that may look out of place.
It’s also great that it keeps a door open wider, instead of the usual 90-degree limit that some door stoppers offer.
It also doesn’t stop on a dime, which makes sense.
With the all-metal build, a sudden stop can make a lot of noise.
Instead, the door flexes and opens a bit wide before it reverts to its resting point.
Things to Consider
You may want to take this “flex” into account when you set up this door stop.
Or else you might just end up slamming the door into the wall anyway.
It is, however, crucial that you use this with wider hinge plates.
If it’s not, you better replace it with a wider-plated hinge or else you’ll just damage the door and the wall.
Conclusion: Commercial Hinge Pin Door Stop
When you own a shop or run a business in an office, you don’t really want your door to slam into a wall.
It’s very disruptive, and it can affect the work flow.
If you have shoppers, then they may not feel at ease when doors keep slamming.
Of course, there’s also the risk of damaging your shop wall or the door knob when doors are constantly slammed into the wall.
Pick the right commercial hinge pin door stop, and this is a problem you can solve so that your business runs a lot more smoothly!