It makes a lot of sense to look for a suitable monitor arm for glass desk because not all monitor mounts will work.
Keep in mind that with a glass desk, you may not be able to use a C-clamp or a grommet mount for the desk.
That leaves you with a free-standing option.
A wall mount doesn’t really work, since very few people set their desk against a wall either.
This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
Why You Need a Monitor Arm for Glass Desk
A proper monitor arm glass desk pairing gives you a stable setup, as you may be worried that your monitor may teeter into the glass.
One reason you may be looking for a monitor arm for glass desk is that you have 2 monitors on your desk.
That’s a very common issue among glass desk users, and you may notice that our monitor desk mount options on this list are all for 2-monitor setups.
Given all these conditions, you can’t just get any monitor mount and call it a day.
It has to be a suitable monitor arm for glass desk.
The good news is that we can help you make that proper choice so you have an optimal monitor arm glass desk setup.
Factors to Consider
When you read the spec sheets and reviews, pay attention to these specific considerations:
Number of Monitors
Obviously, the monitor arm for glass desk you get must be able to accommodate the number of monitors you have.
So why is our list only featuring dual-monitor stands?
The answer is that with a glass desk, having 2 monitors may be the optimal setup.
If you have a single monitor, then that’s fine,but you don’t really need special monitor stands.
The stand that comes with the monitor ought to work well enough, so many people don’t really need a single monitor desk mount.
Why One Stand is Best for Glass
The problem is that the glass desk doesn’t look as neat when you have 2 such stands blocking the view through the glass.
So you need a single stand that’s able to handle a dual monitor setup.
But why not use 3 monitors or more and have a triple monitor desk mount?
The problem with too many monitors is that the glass desk may not be able to handle the combined weight.
Also, it’s hard to use 3 monitors and still go for a neat look for your desk.
Do you want your monitors to sit side by side?
Or do you want one monitor set on top of the other?
We have both options listed on our list of top models for monitor arm for glass desk.
You need to make sure that the stand can actually accommodate the 2 monitors you have on your desk.
Your monitors must be within the size range the monitor arm for glass desk is designed for.
You also must check that your monitors have the required VESA mounting pattern.
There may be a weight limit as well, and the weight of each monitor should not exceed the weight limit.
Given that we can’t expect to use C-clamp installation or a grommet mount, we’re left with the standard free-standing option.
That can be difficult with 2 monitors, but the right monitor arm glass desk combo can provide secure stability without being too huge.
The base should also be mindful of the inherent fragility of the glass, which means you can’t have your base scratching your glass base.
Having 2 monitors and 4 cables all in all on your desk can make everything look cluttered and disorganized.
It defeats the usual purpose of using a neat glass desk to begin with.
This means you need proper cable management features in the monitor arm for glass desk, so that the cables are all out of sight.
You’ll also want these cables out of the way, as you may snag on them and cause your monitors to crash on your glass desk.
That can lead to disastrous results.
One of the benefits of proper desk mounts is that you’re often able to adjust the monitor to suit your seating position.
With the stock stand for the monitors, you’re often required to stand up to change the tilt.
You may have to lift the entire monitor to let it face another direction.
The height of the monitor can be especially hard to adjust, and in many cases you can’t.
You may end up putting the monitor on several books to raise its height, and that’s not exactly a secure and stable setup.
Monitors at Different Heights
Also, if you’re using 2 monitors then you’re likely to have them at different heights.
Finally, it’s not exactly easy either to turn your LCD monitor to a portrait orientation without a special stand.
A good stand should offer wide adjustment angles for optimal viewing.
While having a good-looking stand isn’t exactly a top priority, you really shouldn’t go with an ugly stand.
This will just offset the good looks of your glass desk.
At least most of these stands look nice enough, with slim designs and usually a black color to match most monitors.
Our TOP 5 Monitor Arms for Glass Desk
To help get started on your choice, here are some excellent options you should look over first.
There’s a good chance that one of these options can provide you with the monitor arm glass desk setup you need.
“With Lots of Adjustment Options”
Our Rating: 4.5
If that’s the case, then you may want to consider using this Vivo STAND-V002F dial monitor free-standing desk stand.
Now you have only a single stand on the desk with this Vivo dual monitor stand.
You have that instead of 2 stands that can block the view through the glass desk.
Will Your Monitors Match?
They will, if their sizes are within 13 to 27 inches.
To make sure they’re compatible, check at the back to see that the monitors have either a 75x75mm or 100x100mmVESA mounting pattern.
Also, each monitor cannot exceed the 22-pound weight limit.
You shouldn’t have any trouble with the installation for this monitor arm for glass desk.
It’s basically a 4-step process, and each step doesn’t take a lot of time and effort.
First, remove the screw-on caps from the ends of the stand arm and then you can slide off the VESA mounting plates.
You can attach these plates to the back of your monitors.
Then attach each monitor on the monitor arms, simply by sliding them into place.
This comes with a large base that’s shaped like a boomerang.
Since the monitors are all in front of the stand, the “feet” of the base are also in the same direction.
The base measures 10 by 12.5 inches, so it should be large enough.
The bottom of the base even has padding to keep the base from scratching your glass desk.
The arms are set on the central pole, and you can slide the arm up and down the pole to adjust the height of the monitors.
The arms slide together, so your monitors are always at the same height.
You do have an extra-inch of height adjustment for each monitor, so you can make sure they’re properly aligned.
Rotation, Swivel and Tilt
The monitors can rotate 360 degrees, so you can have one monitor on landscape mode while the other has a portrait orientation.
They can swivel 180 degrees, so you can set both monitors to face you directly.
If you need to show something to a colleague working at a desk beside you, then you can just turn the monitor towards that coworker.
You can also tilt the monitor 45 degrees up or down, so you can set the monitor lower or higher than your eye level.
“Single Pole Dual Monitor Mount”
Our Rating: 4.5
Normally, people like a regular dual monitor setup with the monitors set side by side.
But what if you want your monitors stacked vertically, with one on top of the other?
If that’s what you want, then this monitor arm for glass desk may be the one you’re looking for.
This comes with brackets set on a pole, which measures 35.5 inches long.
You can then set the brackets on the pole to fit your 2 monitors, depending on their orientation.
For the most part, you can put in monitors here with sizes ranging from 13 to 30 inches.
You just need to make sure that these monitors have either the 75x75mm or 100x100mmVESA mounting pattern at the back.
Weight and Size
Also, each monitor can’t weigh more than 22 pounds.
The base again resembles two large feet set at a 90-degree angle.
Each foot in this LCD monitor desk mount stand is 11 inches long, and they’re set 15 inches apart.
This is a steel base, but don’t worry about scratching your glass.
There’s some padding at the bottom of the base.
Installation and Adjustments
It’s easy enough to install the monitors to these brackets, with the VESA mounting plates and all your hardware is included in the package.
You do have to set the monitors properly so they’re not bumping into one another.
The brackets allow for full rotation, so you can set your monitors on landscape or portrait mode.
However, the monitors should be far apart on landscape mode in order to rotate to portrait mode.
The monitors can swivel 180 degrees independently, so they can face in different directions.
You can also tilt them up or down 45 degrees, which lets you set one at eye level, while the other can be set higher or lower.
“Stable Mount with Great Adjustments”
Our Rating: 4.5
You won’t have to worry about stability with this mount, since the base here is huge and heavy.
With this mount, you can set up and adjust 2 monitors fine, without having to stand up from where you’re sitting.
If your monitor measures anywhere from 13 to 27 inches, then you can use this monitor arm for glass desk.
Just make sure each monitor doesn’t go over 17.6 pounds.
Also, you need to make sure that the VESA mounting pattern behind each monitor is either 75x75mm or 100x100mm.
Pole with 2 Elbows
This comes with a pole and 2 “elbowed” arms to hold the monitors in place.
You’re able to raise the arms together to set the height, but not separately.
The pole is 16 inches high, and it has 10 height adjustment joints you can use for your monitor height.
The base is especially large and heavy, with a large surface area with the familiar boomerang design.
The middle of this boomerang is quite large, while the feet are 12.5 inches long and set 17 inches apart.
Lots of Adjustment Leeway
This lets you rotate the monitors fully, so you can have one monitor in landscape mode (even inverted) while the other one is in portrait mode.
The swivel action offers a 90-degree turn to the left or right.
So you can show stuff on the monitor to the people sitting on desks beside yours.
You can even set the tilt up or down by 45 degrees as well.
If for some reason you don’t want to set the monitors at your eye level, then you can still look down or up your monitors.
4. VIVO Full Motion Dual Monitor Free-Standing Desk Stand VESA Mount with Articulating Double Center Arm Joint
“For Fully Adjustable 30-Inch Monitors”
Our Rating: 4
This monitor stand is made from steel and aluminum, which explains why it’s so tough.
The design lets you hold 2 monitors in various positions, though they’re both at the same height level.
With this sturdy build, you should be able to work with 2 monitors that you’re able to adjust to suit various sitting positions and viewing preferences.
This can deal with monitors measuring 13 to 30 inches.
You can even set up two 32-inch monitors here, though that will limit your screen positioning options.
All you need to do is to check if the VESA mounting patterns at the back of your monitors are either 75x75mm or 100x100mm.
Also, each monitor shouldn’t weigh more than 17.6 pounds (that’s per screen).
As we’ve already mentioned, Vivo used steel and aluminum for this stand.
More specifically, the arms are mostly aluminum, but you have heavy steel for the base.
This base has the standard boomerang design, with each foot measuring 11 inches long.
The feet are set 15 inches apart, at a 90-degree angle.
The pole is 18 inches long, while the 2 arms when fully extended measure 36 inches across.
You also have padding at the bottom of the base, so you don’t end up scratching your beautiful glass desk.
There are lots of options here to position your monitors,
The arms have an articulating design, which basically means these arms have “elbows”.
You can then adjust the arms every which way to set them to your viewing preferences.
Degrees of Adjustment
You can rotate the monitors 360 degrees, meaning you can go with portrait mode or even with an inverted landscape mode.
The swivel is 180 degrees as well, so you can show stuff on your monitors to the coworker working on a desk right across your own desk.
The tilt can also go up or down 45 degrees, so you can set the monitors low or high.
All in all, you have a lot of leeway here, which is great if you have a couple of 27-inch monitors.
Set one on portrait mode when you’re working on a document, and leave the other one for YouTube videos on landscape mode if you want.
“Classy Mount for Glass Desk”
Our Rating: 4.5
Yes, it’s another Vivo.
What can we say, except we really like this brand, and we do have good reasons for it?
Some people, though, don’t particularly like the boomerang design for the base.
For those who want a “classier” base, then this has the cool, square base you want.
The Glass Base
For some people, it seems particularly appropriate to have a glass base for their monitor arm glass desk setup.
This isn’t fragile glass, though.
Instead, this is tempered glass which is much tougher.
It measures 16.75 inches wide and 10.25 inches deep.
You’ve got padding on the bottom and sides as well.
Your 2 monitors each have an ergonomic arm with an elbow, so you have 6 adjustable joints.
These arms can be tightened or loosened depending on your preferences.
The arms also feature cable management clips, which you’ll also find on the center pole.
You can set height of the arms along the length of the pole, which is 17.5 inches long.
This will work for monitors with sizes ranging from 13 to 27 inches, as long as they have the 75x75mm or 100x100mmVESA patterns.
These monitors also shouldn’t go past the 22-pound limit (for each monitor).
The setup here offers full 360-degree rotation, meaning you can turn the monitor upside down and then back right side up.
Even the swivel is 360 degrees, so you can show the stuff on your monitor to the people sitting in front of you.
That also means you can set both monitors to face you directly.
You can even tilt the monitors up or down by 45 degrees.
Monitor Arm for Glass Desk: Conclusion
When you have 2 monitors for your glass desk, things can get cluttered and disorganized.
That defeats the purpose of getting an elegant glass desk in the first place.
The lack of space on your desk may even hinder your productivity.
This in turn defeats the purpose of getting 2 monitors to begin with.
All in all, you can pick the right monitor arm for glass desk from our list, and you can boost your productivity in style!