It makes a lot of sense that an increasing number of people these days are looking for a sliding monitor mount for their work desk monitor.
That’s because a monitor on a stock mount doesn’t offer an easy way to adjust their height level.
Sure, you can just turn the monitor on its base to swivel it and show stuff on the monitor to the other people beside you.
This post, its photos and table include links to products on other websites. If you purchase something through these links we may earn a commission at no extra cost to you.
You may even be able to adjust the tilt of the monitor a bit.
But the optimal viewing angle is with the monitor directly aligned with your eye level.
That way, you won’t end up with bad posture along with neck pain and backache because you’re not seated right to view your screen.
Why You Need a Sliding Monitor Mount
However, there’s no easy way to adjust the height of your monitor if it’s on its stock mount.
You may have to find books with the right thickness (good luck with that) to place under the monitor base to raise the monitor.
That’s just annoying to do, plus it’s inherently unstable.
A slight bump to the monitor can cause it to fall and get damaged.
What you need is a way to raise your monitor height easily, even without having to stand from your seat.
We can help you with that, with the right sliding monitor mount.
What’s a Sliding Monitor Mount?
Basically, it’s a mount option where your monitor is set on a pole or column.
Your monitor then slides up and down the pole, allowing you to set the height of the monitor much more easily.
If another person uses your height adjustable monitor, they’ll be able to set the monitor to their own eye level without wasting much time and effort.
Once they’re done using your monitor, you can then adjust it back to the monitor height for you.
Factors to Consider
Some of these things are accessories that are meant to come between the bracket and your monitor.
That means you have a monitor mount already, except the mount doesn’t let you adjust the monitor height easily.
For example, your Acer monitor mount may offer monitor height adjustment, but you’ll need to use a tool and take a lot of time.
In some cases, you’re getting a complete sliding monitor mount.
This may be a free-standing mount, or you may have a desk-mounted monitor which you need to clamp or bolt to your table.
You may also have a wall mount instead.
Many of these sliding monitor mount models may work for different brands of monitors, unlike an Acer monitor mount which may only work with Acer monitors.
However, the sliding monitor mount may be designed for certain monitor sizes, and there may be a maximum weight limit for the monitor.
You also need to make sure that the VESA mounting pattern of the monitor matches the mount.
For the most part, installing a sliding monitor mount should be simple and easy.
An easy install shouldn’t take more than 15 minutes.
Just check that the package comes with all the hardware you need, and it would be nice if it comes with the tools you need as well.
You may, however, need your own screwdriver.
Make sure that the purchase comes with clear directions, and it’s great if you can find a demo installation video on YouTube for the model.
Height Adjustment Range
What’s the range of the height adjustment?
The higher range you get, the more people can be able to use the monitor at the right height.
With a limited height adjustment range, tall people may not be able to look at the screen at direct eye level.
With a really wide range of height adjustment leeway, you may even use the mount for a stand desk.
Ease of Height Adjustment
Some of these options offer height adjustment that requires an allen wrench.
This may take a bit of time and effort.
A better way is if you can just sit on your chair while you set the height by hand.
That doesn’t waste time at all.
It’s great if your mount monitor gives you a neat and organized work desk.
A wall mounting option can work, though not if you don’t work with your desk set directly to the wall.
The good news with a monitor wall mount is that it saves space, which is crucial if you work in a cubicle.
You should also look for cable management, so the monitor cables don’t give your desk a disorganized vibe.
If you have a dual monitor setup, then you need mount kits with 2 monitor arms.
You may find an Acer monitor mount with lots of features, but don’t forget that height is crucial.
Some extra features include touch adjust, which really makes it a lot easier to adjust the height, but a slight bump may just change your settings.
Another feature you should look for is cable management.
This usually means setting the cables along the central columns or along the arms of the mount.
This gets the cables out of the way, and gives you a neater look.
Our TOP 5 Sliding Monitor Mounts
It’s easy enough to be overwhelmed by the many options in the market claiming to improve your ability to adjust your monitor height more easily.
Let’s cut to the chase and get to your best options right now:
“Simple Accessory for Height Adjustment”
Our Rating: 4
This is basically an adapter you attach to the back of your monitor.
This adjustable mount lets you slide the monitor up and down.
You attach this to a monitor mount that doesn’t let you adjust the height, or you can’t do it easily.
But with this bracket, you can adjust the height of your monitor with just your hands and with no tools needed.
You won’t even have to stand up from your chair.
Your monitor can match with this adaptor if it has the required features.
First, it has to measure within a range of 13 to 27 inches.
It can’t weigh more than 17.6 pounds.
Your monitor’s AV and power ports should be to the side of the center, or else this mounting bracket may block these ports.
Most importantly, the back of your monitor should have either the 75x75mm or 100x100mm VESA mounting hole pattern.
This is just an accessory, so it’s not exactly rocket science.
You get all the hardware you need along with the instructions.
If you have a screwdriver, then you’re good.
Nice Black Finish
This has a nice black finish, which matches up well with most monitor stands.
Also, you have some protective padding between the monitor and the bracket so you prevent your monitor from getting scratched and scuffed.
Once you’re done setting this up, you can then adjust the monitor height by hand.
You can raise it up by 3.25 inches, or lower the height by 3 inches.
That’s a total of 6.25 inches of leeway for your monitor height.
“Great Deal of Adjustments”
Our Rating: 4.5
This one doesn’t need you to buy another mount stand first, because it’s a mount for your monitor already.
This is a free-standing monitor desk mount with the standard boomerang design for the base.
It has a pole with a bracket, where you then attach the monitor.
You just slide the monitor up and down the pole to set the height.
This can work with monitors and even TVs up to a size of 32 inches.
If your monitor isn’t heavier than 17.6 pounds, then the stand can support the weight.
What you do need to check is the VESA mounting pattern at the back of your monitor.
It has to be either 75x75mm or 100x100mm.
This is a free-standing mount, which you just have to place on your desk.
The boomerang design resembles two feet set 90 degrees apart, with a fat middle area on the boomerang.
The “feet” measures 11 inches long each, and are 15.4 inches apart.
It won’t be super-easy to adjust the height here, but it can be done securely.
At least it’s better than setting books under the monitor stand.
In this case, you have an allen wrench that you use to loosen the bolt securing the bracket on the pole.
Once that bolt is loose, you then slide the bracket up and down the pole to set its new height.
Since the pole is 18 inches long, you have a lot of height leeway to work with.
At least the pole comes with a convenient slot for the allen wrench, along with clips for cable management.
The good news is that this mount lets you do other monitor adjustments by hand.
You can rotate this monitor 180 degrees, which allows for both landscape and portrait mode.
You can swivel the monitor 90 degrees to the left or right.
You can even tilt the monitor up and down by45 degrees, in case for some reason you haven’t set the monitor directly at your eye level.
“Good Monitor and Keyboard Mount”
Our Rating: 4.5
This can be a bit complicated to install, though it’s easy enough if you can watch a demo video.
At first glance, this looks like a free-standing mount, but it’s really not.
What seems like the base at the bottom is actually a tray for your keyboard.
Instead, you’re supposed to mount this directly to your wall.
This comes with a 100mmVESAmounting hole on the back so that you can attach an articulating arm to this sliding monitor mount.
But you can also just attach your monitor using either the VESA75x75mm or 110x100mm pattern.
This should be able to accommodate a 32-inch or even a 34-inch monitor, provided that the VESA pattern matches.
Height Adjustment Range
The column here on which your monitor slides up and down is 24 inches long.
However, your monitor can only adjust up and down by 4.5 inches, which is thankfully enough leeway for most people.
The reason for this limit is that the pole also accommodates the keyboard tray, which also has enough space to hold a mouse to the side.
This tray can also slide up and down, this time by 3.5 inches.
How to Adjust Height
Making the height adjustment is easy enough, as all you have to do is turn the release knob.
This loosens the attachment, so you’re able to slide the monitor up or down the column.
When you have the height you want, just tighten the release knob.
Swivel and Tilt
There’s no swivel adjustment, but you can adjust the tilt up and down by 10 degrees.
That way, if someone else uses the monitor for a while then they can just tilt the monitor down or up to see the monitor directly.
The keyboard tray also folds up if you don’t have a keyboard on the tray.
The whole thing, especially the keyboard tray, looks good enough for any office.
The black powder coat gives a serious workplace vibe, plus it matches well with virtually all desks.
This even offers cable management, hiding your monitor cables from view.
“Simple Accessory for Height Setting”
Our Rating: 4
If you have a monitor mount with an arm, you may not be perfectly happy with it.
That’s because you may need a tool (like an allen wrench) to adjust the height of the arm along the central pole.
However, you can attach this to the end of the arm, so that you’re able to adjust your monitor height more easily.
In fact, you can adjust the height by hand.
Easy Height Adjustment
The adapter sits between the mount and your stand, and it gives your monitor a sliding platform for height adjustment.
You can slide your monitor up or down by 3.5 inches, giving you a total of 7 inches of height adjustment to work with.
You can set the height by hand, as you have a toothed track here.
This comes with a silver matte finish, which contrasts nicely with most monitor colors.
Your monitor can work with this accessory if your monitor has the 75x75mm to 100x100mmVESA mounting patterns.
You also need to make sure that the video and power ports aren’t at the center of the back of the monitor.
These ports have to be to the side, so that the height adjustment kit won’t block these ports.
Most of the time, the monitors that work for this sliding monitor mount measures 13 to 27 inches.
The monitor should also not weigh more than 17.6 pounds.
“For Cubicle Monitor Height Adjustment”
Our Rating: 4.5
Working in a cubicle can be annoying for those who appreciate a neat working area.
The desk (if you can even call it that) is so small that you often don’t have much space left for anything else after setting your monitor.
However, with this cubicle monitor mount you can make your workspace a lot neater.
Universal Wall Mount
This has a universal mount that you can just hang on your cubicle wall.
Then you just need to put your monitor on this sliding monitor mount.
This works with monitors measuring 17 to 32 inches, and the monitor should weigh less than 17.6 pounds.
Your monitor should also have the 75x75mm or 100x100mmVESA mounting pattern.
Since it’s designed for cubicle use, there’s no swivel adjustment available since you won’t really need it.
There’s even no tilt, because you should be able to set your monitor to your eye level.
The central column hangs down 12 inches from the top of your cubicle wall.
You then have notched settings for the monitor height spaced about an inch apart.
Just slide it down the central column, and then rest the monitor at the notch nearest your eye level.
Sliding Monitor Mount: Conclusion
When you have trouble setting the height of your monitor, then you have a problem.
This is a problem you can’t just ignore or pretend to be minor.
If your monitor is set to the wrong height, you can reduce work productivity while you end up with neck strain and back pain.
The good news is that you don’t have to stay with your stock Acer monitor mount just because you have an Acer monitor.
You don’t have to think of a custom solution either.
Just use any of the sliding monitor mount on our list and the problem’s solved.